Sébastien FAIVRE

Sébastien FAIVRE

Ingénieur - Responsable projet, Université de Franche-Comté
 

En poste chez Université de Franche-Comte

Précédents : Université de technologie de Belfort-Montbéliard, ALSTOM POWER SERVICES, ALSTOM POWER PLANT, Quebec Advanced transportation institute, ERM automatismes, Endress+Hauser Gmbh, STEMI

 

Précédents : UTBM, Lycée Jules Haag

Parcours

Ingénieur d'études Responsable Chaîne de Traction

Chez Université de technologie de Belfort-Montbéliard

De octobre 2011 à janvier 2015
 

Commissioning Engineer

Chez ALSTOM POWER SERVICES

De 2009 à août 2011
Generator’s commissioning from 30 to 1500 MW in (Gas, Oil, Nuclear). New, retrofit or maintenance projects. Electrical and mechanical checks before start. Off/On load tests for generators its excitation and auxiliaries systems such as (Lube oil, seal oil, hydrogen cooling & drying, water cooling, ...
Lire la suite
 

Quality Engineer

Chez ALSTOM POWER PLANT

De 2008 à 2009
Electrical erection quality control in a lignite-fired thermal power plant (2x370 MW). Inspection of HV and LV equipments, transformers and cubicles, lighting, earthing, cabling and terminations, lightning protections, heat tracing, installation. Approval’s inspections with customers supervisors, ...
Lire la suite
 

Project Manager Assistant

Chez Quebec Advanced transportation institute

2008
Generic test vehicle development with synchronous electric motor and Li-ion batteries. Electronic Power steering dvpt. Tests on “By wire” brake system. Equipments specification definition, research and purchase via Canadian and American providers. Erection tests & validation on electrical ...
Lire la suite
 

UTBM, Belfort

Génie électrique et systèmes de commande

De 2005 à 2008
 

R&D Project Engineer

Chez ERM automatismes

De 2006 à 2007
Development of new didactic products for process control and measurement. Electrical & thermal calculations, PID schemes & Cabinets design. Equipment specifications. Trade Talks. Assembly, Tests, start-up and validation. Completion of V cycle. >New products sales
 

Process Technician

Chez Endress+Hauser Gmbh

2005
Level instrumentation maintenance. Training boards design, documentation creation. devices. Tests and reports concerning electromagnetic compatibility (EMC). > First internship abroad
 

Lycée Jules Haag, Besancon

International projects management, Lycée Jules Haag

De 2004 à 2005
 

Lycée Jules Haag, Besancon

Process control and automation, Contrôle Industriel & Régulation Automatique (CIRA)

De 2002 à 2004
 

Automation Technician

Chez STEMI

2003
Specifications definition, PLCs and HMI programming, (Siemens, Schneider, Kep). Electronic driver, speed and position sensors calibration for smart brushless motor. > Commissioning and acceptance tests completed sucessfully with the customer
 

Compétences

 
  • Ingénierie

Langues parlées