Menu

Lioudmila MACKEL

Paris

En résumé

COMPÉTENCES :
- Basic du procédé : simulation procédés, bilan matière et thermique, bilans utilités, élaboration PFD, PID, UID, liste d’équipements, liste des lignes, liste des instruments, calculs de dimensionnement et spécifications techniques des équipements, émission de data-sheets, études de sécurité (soupapes…)
- Suivi du procédé : vérification que l’ingénierie de détail est conforme au basic et aux règles de procédés
- Participation au suivi et à la maitrise technique des offres fournisseurs d’équipements de procédés
- Manuel opératoire
- Travail sur chantier : «site-survey» precommissioning
- Participation aux réunions HAZOP / HAZID

Entreprises

  • Technip - Lead process Engineer

    Paris 2019 - 2019 TechnipFMC, Lead Process Engineer
    Sohar LNG Bunkering project : new onshore midscale LNG plant in Oman (Sohar port).

    LNG facilities with a LNG Train of about 1 mtpa capacity treating 150 mmscfd yearly of feed gas, with associated inlet facilities, gas pre-treatment, HHC removal, Liquefaction, NRU, LNG storage tank and utilities systems with necessary storages.
  • Perenco - Senior process Engineer

    Paris 2018 - 2019 Gas Lift optimisation project: compressor package.
    Water injection & BS&W improvement project: sea water treatment package.
    SSLNG project (Sanaga project of Central Africa offshore): FLNG construction (Floating Liquefied Natural Gas production unit), pre-FEED of small scale LNG plant (30 MMscfd or 1500 m3 of LNG / day).
  • Total - Lead process Engineer

    COURBEVOIE 2017 - 2018 Oudalle 2018 project. Basic Engineering Study and FEED for revamping of the existing plant HDA (Hydro De-aromatisation) in Normandy.
  • Doris Engineering - Senior process Engineer

    Paris 2017 - 2017 Zinia Phase 2 STI (Subsea Tie-in) project for Total. PAZFLOR field development of Angola offshore.

    FPSO topside modifications:
    o PSV relief load calculation & EDP (emergency depressurization) calculations and HYSYS simulations
    o Control valves and pumps calculations
    o Flare network verification
  • NCOC (North Caspian Operating Company) - Lead Onshore Process Engineer

    2015 - 2016 Kashagan field development $187 bln (large over pressured light oil accumulation with a high H2S content), EWRP - Eskene West Rail Project.

    The EWRP facilities will provide the capacity to export 150.000 bopd of oil and 4.500 t of Sulphur each day from the Kashagan field located in the Caspian Sea offshore Kazakhstan with extreme environmental conditions in winter due to ice cover and in summer due to high temperatures. The main Units of project : oil loading, Sulphur treatment and granulation, Sulphur Pastillation Unit, Utilities Configuration as Fuel Gas Unit, Power Generation Unit, SWS Water treatment plant.
  • Total - Lead Process Engineer

    COURBEVOIE 2013 - 2014 Kharyaga Field development project, Phase III
    The 3rd stage in development of the Kharyaga field (above the Arctic Circle) involved maintaining a capacity of 30,000 BOPD by bringing new wells online and in addition, increasing water injection capacity to 60,000 BWPD, stop routine flaring and the upgrade of the CPF facilities for treatment and export of associated gas: installation of amines sweetening unit, Claus unit, mercaptan removal & dehydration unit, hydrocarbon dew pointing unit, export gas compression, power generation unit.
  • Le Gaz Integral - Sr. Process Engineer

    2012 - 2013 Norilsk Nickel Project - Customer: Copper plant and Nadezhda plant in Russia.
    FEED of two Claus SRU (sulphur recovery unit) with the guarantee of at least 95% utilisation of sulphur dioxide from exhaust metal production gases. The first phase of 1,8 billion project includes the construction of new capacities producing annually up to 950,000 t of sulphur with reducing sulfur dioxide emissions 4.5 times ($170 million).
  • PROSERNAT - Ingénieur Procédés

    RUEIL MALMAISON 2012 - 2012 GISSAR PROJECT - Republic of Uzbekistan
    Basic Engineering Study for development of gas-condensate fields Adamtash, Gumbulak, Djarkuduk - Yangi Kizilcha in Uzbekistan.
    Supply of technical documentation and equipment.
  • LITWIN - Ingénieur Procédés Sénior

    2006 - 2012 01/ 2012 – 05/2012 EPC Project «Organic Rankine cycle for Turkish cement plant» (within the R&D project «Design, optimization and modeling of an organic Rankine cycle for waste heat recovery»).
    Feasibility study.
    08/2010 - 12/2011 R&D Project «CO2 capture by Amine Absorption».
    Conceptual Study. Patent registering in the form of an «Enveloppe Soleau» for a new process “FE&M” at the “Institut National de la Propriété industrielle” (National Institute of Industrial Property).
    05/2010 – 07/2010 Project «Mimizan Cogeneration Plant» (France).
    Technical proposal for a biomass cogeneration plant 23 MWe – 39 ton/h steam.
    10/2009 – 03/2010 Project «Gas Plant D9» with Total-CERT (Researches &Technologies European Centre) - TOTAL Normandy’s Refinery.
    Basic Engineering Study for revamping of the gas plant.
    02/2009 –10/2009 Project «OSCAR 1» - GRT gaz (Gas compressor station).
    Management of the Client and Supplier Punch List by with ICAPS software (Integrated Commissionning and Precommisionning System).
    08/2008 - 02/2009 Project «Total CDU» with Total-CERT (Researches &Technologies European Centre) - TOTAL Normandy’s Refinery.
    Feasibility study for the revamping of an atmospheric distillation & gas plant.
    03/2008 - 08/2008 Projects «Angaing» & «Laigang» - Chine (EPC coal tar distillation plan).
    Detailed Engineering.
    05/2007 - 03/2008 Project «MMA» - Germany.
    Customer: QUINN Chemical GmbH. Engineering of a 100 000 ton/year Methyl Methacrylate (MMA) Plant in Leuna of 200 million € investment.
    Detail engineering.
  • CEAMAG, Plaisir - Ingénieur projet

    2005 - 2006 Projet «Lindab-Astron», Luxembourg (construction d’une usine de fabrication des structures métalliques en Russie)

     Synchronisation et planification des travaux (Luxembourg, France, Russie)
     Suivi du budget et respect du planning
     Vérification des calculs «Heat consumption» et expertise technique des équipements appropriés (chaudières, pompes)

Formations

  • Institut Des Technologies Chimiques De D.I.Mendélèev (Moscou)

    Moscou 1979 - 1985 Ingénieur Procédés

Réseau

Annuaire des membres :