Abdelkader MASRI

En résumé

Entreprises

• Renco SpA - WORKSHOP PREFABRICATION QUALITY MANAGER

  2013 - maintenant RENCO S.P.A (BRANCH OF CONGO)
  
  
   INTEGRATION TO DJENO : MOHO NORD PROJECT (CONGO)
   Project : MOHO NORD
   Owner : TOTAL
   Contractor : RENCO
   Subcontractors : SICIM, SPIE.
   Standards :EN 287-1, EN ISO 15614-1, EN ISO 15609-1; AWS D1.1 .
   Third party: APAVE.
  
   REWAMPING OF STEEL STRUCTURE, PIPING AND SECURITY SYSTEM OF THE PLATEFORMS DP4 & DP5 OF LOANGO’S FIELD (CONGO)
   Project : Loango Field (Republic of Congo)
   Owner : ENI CONGO
   Contractor : RENCO/SICIM
   Standards : ASME , AWS D1.1
   Third party: APAVE.
   EXPLOITATION OF KUNDJI FIELD (CONGO).
   Project : Exploitation of Kundji field (République du Congo)
   Owner : Société Nationale du Pétrole du Congo (S.N.P.C).
   Contractor : RENCO
   Standards : ASME , AWS D1.1
   Third party: APAVE.
  Personal Duties: Workshop Prefabrication Coordinator / Deeputy Manager
   Coordination with the project managers about the arrival of the material to the workshop .
   Qualitative and quantitative control of the material and equipements box received in the workshop (quantity, conformity in material certificates and specifications,Packing lists...).
   Verification of storage conditions.
   Dispatching of the material to the projects.
   Coordination with the different departements (Engineering, Construction ; HSE ; QA/QC and Logistics).
   Reporting to the prefabrication Manager, project Managers and branch General Manager.
   Coordination with the warehouse, workshop responsibles and formens (work planning ; work division …).
   Follow up of the work progress according the planning for all the projects ( steel structure, piping, supports…).
   Follow up of the drawings approved for Construction.
   Coordination with the different clients about the inspection of Incoming material according the ITP.
   Management of the NCRs.
   Vérification of theapplication of the standards ; specifications, ITP and quality procedures of all the clients.
   Verification of the prefabrication documentation of all the items for all the projects.
   Coordination with the clients for verification and inspection of the material before sending to site.
   Expedition of the material with its quality documentation.
  

• Boccard - QA/QC MANAGER

  Villeurbanne 2012 - 2013 IKRA PROJECT: NIZHNY NOVGOROD INTEGRATED VINYLS PLANT (RUSSIA)
  
   Project : Construction of Vinyls plant
   OWNER : RUSVINYL
   CONTRACTOR : TECHNIP
   SUBCONTRACTOR : BOCCARD.
   STANDARDS: GHOST, ASME IX; API 650
   THIRD PART: NGS GROUP.
  
  
  Personal Duties: QA/QC MANAGER
  
   Conformity of piping fittings & consumables with specifications and certificates.
   Check of material arrival.
   Management of the quality team (welding and mechanical Inspectors).
   Follow up and supervision of piping spool’s and supports fabrication (shop welds) & erection (field welds).
   Elaboration and follow up of ITPs (Inspection and Testing Plan) according the requirements .
   Preparation of the preliminary WPS (carbon steel, stainless steel, Duplex).
   Approval of preliminary WPS (Welding Procedure Specification) and PQR (Procedure of Qualification Record) by the third part.
   Welding Qualification Test (WPQ + NDT request) with the third part.
   Welding book (5000 inch welded).
   Mangement & follow up of the NCRs.
   Dimensionnel; bolting; tightening & verticality controls of the steel structure.
   Welding, Handblasting and painting Inspection of the steel structure.
   Supervision of erection and follow up of welding activity of the tanks.
   Dimensionnel; Welding; handblasting; hysrotest and painting controls of the Tanks.
   Vaccum test of the tanks.
   NDT programms.
   Coordination with the third part.
   Hydrostatic Test of the tanks.
   Elaboration of weekly report to the project and site manager
   Control of the subcontractor’s documentation.
   Coordination with the subcontractors and the final client.
   Review of Final documentation.
  

• SNC LAVALIN - QA/QC PIPING MANAGER

  Ivry-sur-Seine 2012 - 2012 Personal Duties :Mechanical QA/QC &PIPING ENGINEER &
  
   Conformity of piping fittings & consumables with specifications and certificates.
   Check of material arrival.
   Follow up and supervision of piping spool’s fabrication (shop welds) & erection (field welds)(BOP; Turbo-group & Boiler piping).
   Resolving all the modifications on field.
   Coordination of piping supports fabrication and erection.
   Elaboration and follow up of ITPs (Inspection and Testing Plan) according the requirements .
   Preparation of the preliminary WPS (carbon steel, stainless steel, alloyed steel P11, P22 & P91, Duplex).
   Approval of preliminary WPS (Welding Procedure Specification) and PQR (Procedure of Qualification Record) by the third part.
   Welding Qualification Test (WPQ + NDT request) with the third part.
   Welding book (65000 inch welded).
   Mangement & follow up of the NCRs.
   Supervision and control of the erection activities of the Turbogroup (; Diffusor; GT; Generator; ST; Air intake system & Condensor)
   Dimensionnel; bolting; tightening & verticality controls of the steel structure.
   Welding, Handblasting and painting Inspection of the steel structure.
   Dimensionnel; Welding; handblasting; hysrotest and painting controls of the 6 Tanks.
   Dimensionnal; welding, handblasting & painting control of the condenser.
   Welding Inspection of the casing and outlet duct of the boiler.
   Control of erection and welding activities of the different parts of the boiler (RH; SH; Economisator; collectors).
   NDT programms.
   Hydrostatic Test: prescription of Test Pack.
   Control of the subcontractor’s documentation.
   Coordination with the subcontractors and the final client.
   Review of Final documentation.
  

• SENAD MAROC - QA/QC & piping ENGINEER

  2012 - 2012 Personal Duties : Mechanical QA/QC Engineer
  
   Conformity of piping fittings and consumables with specifications.
   Coordination of piping spool’s fabrication (shop welds).
   Resolving all the modification on field ( fuel line, washing line, water drains line)
   Coordination of piping supports fabrication and erection.
   Review of ITP (Inspection and Testing Plan)
   Preparing the preliminary WPS and approval of PQRs ( carbon steel, stainless steel, alloyed steel : P11, P22 & P91)
   Approval of WPS (Welding Procedure Specification) by the third part.
   Welding Qualification Test (WPQ + NDT request) with the third part.
   Welding book (1800 inch welded).
   Visual inspection.
   Alignement control (rotor line) (GENERATOR & STEAM TURBINE ( BP,HP)).
   Supervision of mechanical erection activities.
   Piping supports.
   Dimensionnal control.
   Control of the ercection activities of condenser.
   NDT Reports.
   Hydrostatic Test: prescription of Test Pack.
   Preparation of final documentation & Comissioning.
  

• ANSALDO CALDAIE - TOP ENGINNER

  2011 - 2011 • Final walk down Inspection
  • Preparation of punch lists
  • Preparation of TOPs (Turn Over Package).
  • Closing punch items with the final client (ONE).
  

• SENAD MAROC - QA/QC ENGINEER

  2011 - 2011
   Conformity of piping fittings and consumables with specifications.
   Coordination of piping spool’s fabrication (shop welds) & erection (Field welds)(Boiler piping).
   Coordination of piping supports fabrication and erection.
   Control of erection and welding of the different parts of the boiler.
   Endoscopic control of the panels and the different parts of the boiler.
   Review of ITP (Inspection and Testing Plan).
   Preparing the preliminary WPS ( carbon steel, stainless steel, alloyed steel P11, P22 & P91)
   Approval of WPS (Welding Procedure Specification) and PQR (Procedure of Qualification Record) by the third part.
   Welding Qualification Test (WPQ + NDT request) with the third part.
   Welding book (45000 inch welded).
   Management and follow up of the NCRs.
   Visual inspection.
   Alignement control (panels).
   Control of mechanical erection activities.
   Control of the erection ;welding and modification of the different parts of the boiler (SH; RH ; Economisator; panels)
   Ducts control (Primary air Ducts, Secondary air Ducts, Smoke Ducts).
   Smoke test.
   Construction & control of the heavy ash silo (according API 650).
   Piping supports
   Dimensionnal control. (piping, Steel structure…)
   Painting inspection.
   Preparation for Insulation.
   Insulation control.
   NDT Reports.
   Hydrostatic Test: prescription of Test Pack.
   Preparation of final documentation & Comissioning.
  

• ALSTOM POWER SYSTEMS - FINSHING WORK ENGINEER

  Levallois-Perret Cedex 2010 - 2010 • Final walk down Inspection
  • Preparation and follow up of the punch lists
  • Closing punch items with the final client ( STEG)
  

• SDEM ENTREPRISES - QA/QC & Piping ENGINEER

  2009 - 2010 Personal Duties :Mechanical QA/QC & piping Engineer
   Conformity of piping fittings and consumables with specifications.
   Coordination of piping spool’s fabrication (shop welds) & erection (field welds).
   Resolving all the modification on field.
   Management and follow up of the NCRs.
   Coordination of piping supports fabrication and erection.
   Review of the ITPs (Inspection and Testing Plan) according the requirements.
   Preparing the preliminary WPS ( carbon steel, stainless steel, alloyed steel P11, P22 & P91; Duplex) and thein approval by the third part
   Approval of PQR (Procedure of Qualification Record).
   Welding Qualification Test (WPQ + NDT request) with the third part.
   Welding book (21500 inch welded).
   Visual inspection.
   Alignement control (rotor line) (GT, GENERATOR & ST).
   Piping supports.
   Control of erection activities of the Turbogroup (Diffusor ; Air Intake System ; GT; Alternateur; ST & Condensor).
   Dimensionnal control.
   Control of the ercection activities of condenser.
   Control of the cooling steam piping
   NDT Report
   Hydrostatic Test: prescription of Test Pack.
   Preparation of final documentation & Comissioning.
  
  

• TAV CONSTRUCTION - Mechanical & piping Supervisor

  2009 - 2009 Personal Duties: Mechanical & Piping Supervisor
  (construction of 3 tanks, kerosene piping).
   Material and consumables approval.
   Drawings approval.
   Coordination with other departments (QA/QC – HSE – Construction).
   NDT request according ITP requirements & API 650.
   Workshop fabrication inspection (dimensional control, welding, painting, visual inspection, conformity with drawing…).
   HVAC Fittings control.
   Dimensionnal check.
   Verticality Inspection.
   Alignement Check.
   Erection Inspection (Bolting, Leveling, tightening).
   Follow of the welding book.
   Supervision of welding activities.
   Valves control.
   Piping supervison.
   Hydrostatic test.
   Cathodic protection – Kerosene storage Tank.
   Painting control of the tanks.
   Painting of fuel hydrant system consisted of 14km of kerosene pipline.
   Punch List and final commissioning.
  

• SICILSALDO - QA/QC Piping ENGINEER

  2007 - 2008
  
  Personnal Duties : QC PIPING ENGINEER
   Conformity of piping and consumables fittings with specifications.
   Review of ITP (Inspection and Testing Plan) requirements of B31.3 + supplementary requirements of SAL2 + Tunisian norms.
   Approval of WPS (Welding Procedure Specification) by the third part.
   Approval of PQR (Procedure of Qualification Record).
   Welding Qualification Test (WPQ + NDT request) with the third part.
   Visual inspection.
   Dimensional check
   Welding book.
   Hydrostatic Test: prescription of Test Pack.
   Test Pack.
   NDT reports.
   Final documentation preparation.
   Follow up of punish Items.
  

Formations

Pas de formation renseignée

Réseau

• Agnès WYCHOWALEK

• Amit GROVER

• Bernard SOUDAN

• Bernard BUIRON

• Juban JACQUES

• Salomé COUTO

• Société GIS-MIC

• Société SERVTEC

• Valerie BREIDENSTEIN