Lalithya Rani SUKUMAR

En résumé

Entreprises

• Expliseat - Design and Simulation Engineer

  Paris (75000) 2018 - maintenant

• Corning - Mechanical Engineer

  Fontainebleau 2017 - 2018 • Static, quasi-static and dynamic simulations with ABAQUS
  • Numerical simulations for automotive windshields
  • Fractography analysis
  Tools used are ABAQUS, Python and MATLAB

• Renault - Intern on Crash Simulation

  Boulogne-Billancourt 2017 - 2017 • Modeling of specimens and Pamcrash dynamic simulation for Spot welds of the car doors
  • Fatigue life calculation by adapting rainflow count.
  Tools used are ANSA, Pamcrash, METAPOST, Design-life, Python and MS Office

• Institut PPRIME, CNRS UPR3346, ISAE-ENSMA, Université de Poitiers - Research Project

  2016 - 2017 Characterization of Creep Resistance of Nickel based Super alloy for disk applications.
  Creep characterization with different stress concentrations and microstructures.
  Work: Modeling using CATIA V6 tool, FE Simulation in ABAQUS, Preparation of the specimens, Creep Tests, Fracture surface analysis, Scanning Electron Microscopy (SEM) study and Heat treatments

• Institut PPRIME, CNRS UPR3346, ISAE-ENSMA, Université de Poitiers - R&D Intern on Numerical modeling

  2016 - 2016 Topic: Comparison between the Finite Element Model and the analytical approaches in the stress/strain calculations for an internal porosity influence of morphology of the defect (Fatigue analysis)
  Reference: yves.nadot@ensma.fr
  Tools used: ABAQUS, CATIA, FORTRAN and MATLAB
  

• Oriental Software Pvt. Ltd. - Computer Aided Design (CAD) Engineer

  2014 - 2015 Roles: 3D modeling using Creo and CATIA tools, Performing Thermal Simulation in
  Softcast Software, Testing Softcast versions and training in the same.
  Reference: annie.shibu@oriental-software.com

• Hindustan Aeronautics Limited - R & D Intern

  2014 - 2014 Hindustan Aeronautics Limited (HAL) http://www.hal-india.com
  Aircraft Research and Development Centre division Bangalore, India
  Topic: Modeling and CFD Analysis of a Trainer aircraft wing with Wing Fence and
  Droop. Tools used: CATIA V5, ANSYS, ANSYS Fluent and ICEM CFD

Formations

• Ecole Nationale Supérieure De Mécanique Et D'Aérotechnique

  Poitiers 2015 - 2017 Master of Science
  
  Materials, Aerospace Structural Engineering) ISAE-ENSMA -
  Subjects: Structural Mechanics, Numerical Methods, Material Science, Finite Elements,
  Vibrations, Helicopters, High temperature alloys, Fatigue, Creep, Materials Mechanical
  properties, Fracture Mechanics, Corrosion of Engineering materials
  
  * Worked on `Material Selection for Canadair CL -215 landing gear' as a

• Visvesvaraya Technological University (Bangalore)

  Bangalore 2010 - 2014 Bachelors Degree
  
  7th rank holder in University