Cédric GUEDEGBE

En résumé

Entreprises

• Piping Construction - Engineer

  2015 - maintenant Material Control, Olkiluoto 3 Construction Site
  Construction of AREVA nuclear Evolutionary Power Reactor in Finland
  
  * Interface between engineering team and erection subcontractors ;
  * Develop a roadmap to secure material delivery time to avoid erection blockage ;
  * Management of material procurement in compliance with project specific requirements ;
  * Management of stock of material (pipes, fittings, valves) to allow on time progress of erection ;
  * Track and ensure respect of quality processes with respect of cost and delay ;

• Areva - Piping Construction engineer

  Paris La Defense 2015 - maintenant Management of material to ensure piping erection
  Coordination and management of material procurement
  Reporting to project management on progress of material procurement and risk on erection
  
  Check and guaranty consistency with quality requirements
  Check & write purchase requests
  
  Manage technical interfaces with suppliers
  Manage interfaces between engineering and procurement
  Coordination with purchasing and procurement department
  
  Solve technical site issues related to engineering as closure of non conformance and clarification requests
  Management of interfaces with erection subcontractors

• AREVA - Procurement Technical Leader

  Paris La Defense 2012 - 2015 Piping Design and Procurement Technical Leader, AREVA NP,
  Secondary and auxiliary piping system for nuclear Evolutionary Power Reactor's projects (UK, & OL3, TSN) and New Builds (ATMEA, Standard EPR)
  
  * Leader of piping design team (3FTE): definition of scope of work, budget & schedule ;
  * Management of interfaces with others disciplines (Layout, Project, Process, etc.) ;
  * Management of subcontracted studies (design & procurement of piping component) ;
  * Technical support for material definition and pressure equipment sizing ;
  * Resolution of technical issues between Engineering, Procurement, Suppliers & Erection Site ;
  * Release & verification of technical documentation (design report, specification, requisition) ;
  * Preparation of technical documentation for RFQ; analysis, selection of suppliers ;
  * Drive Kick-off, clarification & progress meetings ;

• AREVA NP - Entry point - Piping design and procurement team leader

  Paris La Defense 2012 - 2015 Pilot of Hinkley Point and Olkiluoto 3 (EPR: New Generation of Nuclear Power Plant) project piping design activities:
  
  - Interface with project manager, reporting of follow up of the activities
  - Supervise design team (3 FTE): Built the team schedule and budget according to project schedule
  - Drive technical meetings and clarifications with the customer
  - Ensure interfaces with others specialties and project team
  - Design and calculations of materiel regarding pressure sizing, including piping classes
  - Preparation of material specifications and requisitions, documents for purchase order including management of bill of quantities
  - Follow up of suppliers deliveries, verification of technical documents and treatment of non conformance

• AREVA NP - Mechanical Piping Engineer

  Paris La Defense 2008 - 2012 Secondary and auxiliary piping system for nuclear Evolutionary Power Reactor's projects (UK, OL3, TSN) and New Builds (ATMEA, Standard EPR)
  
  * Piping stress & hydrodynamic analysis - 2D Finite element calculation ;
  * Structural, thermal and mechanical analysis of standard and special supports - 3D Finite element calculation ;
  * Issue & verification of technical documentation (calculation notes, loading design specifications) ;
  * Insurance of good interfaces with General Layout, Pressure equipment (loads / Installation) ;

• AREVA NP - Piping mechanical engineer

  Paris La Defense 2008 - 2012 Piping Mechanical engineer:
  
  - Piping stress analysis of secondary and auxiliary piping for EPR and new build projects
  - Edition of loadings condition reports for piping stress analysis
  - Piping stress analysis calculation: flexibility and hydrodynamics analyses - 2D Finite Element analysis
  - Thermal and mechanical analysis of standard and special supports - 3D Finite Element analysis
  - Investigation and resolution of technical issues in respect with the interfaces (Layout, enquipmets etc.)

• Pôle Technologique de Ville d'avray - Internship in research and development laboratory

  2006 - 2006 Trainee in research and development of thermal laboratory of technological university of Ville d'Avray :
  
  - Thermal and Mechanical analysis of testing furnace in respect with technical requirements and specifications
  - Consultation of potential suppliers
  - Management of a call for bid

• AREVA NP - Apprentice mechanical engineer

  Paris La Defense 2006 - 2012 Preparation of Master degree coordination of co-operative courses with AREVA NP
  
  - responsible of development of graphic interface for piping finite element software
  - stress analysis of secondary and auxiliary piping for operating power plants

• MG la Champenoise - Stagiaire technico-commercial

  2004 - 2004 Stagiaire technico-commercial au sein de l’entreprise MG la Champenoise :
  
  Ce poste a axé technico-commercial, m’a appris à m’adapter a une structure de type PME en pleine création. J’ai pu aussi exercer mes compétences en terme de communication en étant directement en contact avec les différents clients afin de mettre en place un catalogue technique destiner à faciliter la vente des produits de la société (ouvrants : portails, fenêtres).
  Les manques de la société, m’ont également poussé à entreprendre la mise en place d’une démarche qualité dans le respect de l’enseignement suivi lors de mon cursus scolaire.
  Ce stage très enrichissant m’a conforté dans ma volonté d’avoir et de développer un côté relationnel dans mes futurs emplois.

Formations

• Université AREVA

  Paris La Défense 2008 - maintenant Initiation to system Engineering principle
  Initiation to cross functional management
  Training in Non Destructive testing methodology and welding process
  Training in ASME and RCC-M standards and failure modes

• UFR SITEC – Université Paris 10

  Ville D'Avray 2006 - 2008 Master 2 - Mechanical and couplings

• UFR SITEC – Université Paris 10

  Ville D'Avray 2006 - 2008 Master 1 & 2 - Mécanique et ses couplages
  
  Education performed in co-sandwich internship in AREVA NP secondary & auxiliary piping & layout depatment

• UFR SITEC (Ville D'Avray)

  Ville D'Avray 2005 - 2006 Licence Mécanique et Thermique Industrielle

• National East West Institute (Wrexham)

  Wrexham 2004 - 2004 HNC - Mechanical

• IUT Ville D Avray

  Ville D'Avray 2003 - 2006 Bachelors Degree - DUT Mechanical
  
  Training in Non Destructive testing methodology and welding process

• IUT Ville D Avray GMP

  Ville D'Avray 2003 - 2005 DUT

Réseau

• Bernard BESSEAU

• Clarisse LIEVRE

• François VERDIER

• Georges GUENNOC MOREL

• Marine FOUREY LOUDEGUE

• Nicolas MARCHAL

• Nina KOBON

• Pascal TASSINARI