Hubert VAUDRON

En résumé

Entreprises

• PLCB Consulting - Painting QC leader - CLOV Project

  LONS 2011 - maintenant

• YLNG - Insulation and Painting Supervisor

  2008 - 2011 QC Insulation/fireproofing Inspector in charge of the;
  - cold, hot, dual and acoustic insulation on 160 000 square meters of pipes and equipments,
  - cryogenic insulation of line pipes
  - two YLNG Tanks of 145 000 cubic meters insulated by foamglas and Perlite,
  - cementatious fireproofing product applied on 10 000 square meters,
  - Organic fireproofing product applied on 20 000 square meters,
  
  Insulation and Painting Supervisor
  - Startup and Maintenane of the LNG plant.

• TOTAL E&P ANGOLA - Painting engineer

  COURBEVOIE 2004 - 2007 - TOTAL E&P Angola [Bloc 17-GIRASSOL - Angola] – 2006- 2007
  Technical assistance to the Project manager for the painting campaign GIRASSOL.
  - TOTAL E&P Angola [Bloc 3-COBF1 - Angola] – 2006
  Painting campaigns preparation for great maintenance of the well platform COBF1 (6000 m2): drafting of the technical specification particular, evaluation and preparation of the budget for partners presentation.
  - TOTAL E&P Angola [Bloc 17-GIRASSOL - Angola] – 2005
  Painting campaigns preparation for great maintenance of the FPSO GIRASSOL: to write a particular technical specification, to fix the priorities and to prepare the budgets over 5 years.
  - TOTAL E&P Angola - [Luanda - Angola] – 2004-2005
  Senior engineer charged of QA/QC on Passive Fire Proofing revamping Project.

• TOTAL E&P Gabon - Painting supervisor

  COURBEVOIE 2004 - 2005 - TOTAL E&P Gabon - [Port Gentil - GABON] – 2005-2006
  Supervision of the paint application works during the coating revamping Project.

• Saipem-Sa /UIC Cameroon - Painting Engineer

  2003 - 2003 - UIC - Cameroon
  Painting specialist in charged of managing three tanking sites Chad - Cameroon project (EXXONMOBIL). This project is constituted of nine tanks with lining for two water fire tanks.

• Saïpem-Sa - Painting Engineer

  Montigny-le-Bretonneux 2003 - 2004 - Saïpem-Sa - [Paris - France] – 2002 - 2004
  Senior engineer charged of bids, and studies for miscellaneous projects.
  Study to special coatings, standards adaptation and the technical and financial feasibility of installation painting workshops in Angola for Kizomba A and B projects (EXXONMOBIL).
  Installation and start-up of the blasting and painting facility from scratch for Kizomba A project (6000 m2), recruitment and training of the blasting and painting operators.

• EMTS - Painting Engineer

  1995 - 2003 Corrosion protection specialist acting as an engineer:
  - Collaboration in the edition of technical manuals:
  - monitoring of the corrosion protection in the Channel Tunnel,
  - maintenance of the fixed equipment in the Channel Tunnel,
  - industrial post-fire decontamination,
  - trainer in the preparation of the corrosion protection inspectors ACQPA/FROSIO for ISITV (Engineering Scientific Institute of Toulon and the Var region).
  - Specialist in corrosion in charge of technical assistance, for:
  
  - UIC - Cameroon
  Painting specialist in charged of managing three tanking sites Chad - Cameroon project (EXXONMOBIL). This project is constituted of nine tanks with lining for two water fire tanks.
  
  - Istanbul Stadium Builders (ISB J.V) - Istanbul - Turkey
  Follow-up the corrosion protection works of the Olympic Stadium of Istanbul (planning, drawing-up the repair procedure).
  Evaluation and treatment of defects in conception, building and application.
  
  - Cybernétix – Reception facilities to measure system for offshore structures - Marseille - France
  Optimise the corrosion protection of aluminium structures meant to receive risers’ instruments for a 20 years lasting life.
  Dimensioning of the cathodic protection of the Aluminium UFM structures.
  Drawing up of the corrosion protection specification by anodic oxydation and organic coating.
  
  - Rail Link Engineering – High speed railways between Folkestone and London - London - England
  Impact studies of the use the factory and the ventilation material during the setting up of the rails and the fixed equipments in two tunnels in the London area.
  
  - Saïpem – Drilling ship - SAIPEM 10 000 - Pointe Noire – Congo - Africa
  Expertise on the coating of SAIPEM 10 000 drilling ship within the end of a warranty for a corrosion protection system.
  
  - Alstom Energie - Jagran - Pakistan
  Initial failure paint coating analysis of five electrical generators of 600MWatt each placed in a cavern at 2800 meters high in the « contested territory » (between Pakistan and India), worksite organisation for a complete paint coating (internal/external) of five units, preparation and application of the new protection with a team of 7 Pakistanis workers, control and business proposal to the Pakistanis client Power Energy.
  
  - ATMB - Autoroutes et Tunnel du Mont Blanc - Chamonix - France
  Following the terrible fire of the Mont Blanc tunnel on March 24, 1999, within the post-fire decontamination framework; characterisation of the contamination by halide for the equipments and civil work for the 11600 meters of the tunnel and the two ventilation stations (French and Italian parts). Project managing the OPC mission (Organisation, Plan and Controls) ; this worksite lasted for 3 months, costed 40 millions francs and mobilised 5 companies and about 170 persons.
  
  - Sedco Forex - Schlumberger - Brest - France
  Technical assistance during the construction of two oil rigs at the Brest Arsenal
  Follow up of the starting up of the companies in charge of the application work, procedures approval for the work and the contract management (DCN Brest) .
  
  - ACH – Shipyard building workshop of Le Havre - Le Havre - France
  Painting department audit (methods and operations) requested by the general manager of the worksite during the construction of two chemical vessel for Stolt company.
  
  - Eurotunnel / Matériel Roulant - Coquelles - France
  In charge to providing technical solutions relating to corrosion protection failures, choice of materials and methods of assembly for rolling stock, in the form of technical documents.
  
  - Eurotunnel / Equipements Fixes & Structures - Coquelles - France
  Evaluation of corrosion protection defect of fixed equipments in the Channel Tunnel and the level of contamination by halogen products as a result of the

• CETIM (Centre Technique des Industries Mécaniques) Senlis - France - Assistant corrosion engineer

  1994 - 1995 - Assistant corrosion engineer attached to the surface treatment corrosion department of CETIM.

• SGE-CAMPENON BERNARD - Civil engineer

  1989 - 1994 TRANSMANCHE CONSTRUCTION (CHANNEL TUNNEL) Calais - France
  
  Painting quality control inspector for the district pit and outside development.
  
  Civil engineering quality control for the district pit and outside development, close of cooling factory construction and more specifically structural steelwork and protective coating.
  
  Team leader for the pit and outside district directing a staff of 40 workmen, management of treatment and pumping of excavation tunnel boring machine materials, conveying necessary materials to the face, production of cement mortar for injection.

• French Army - Lieutenant (ORSA)

  1986 - 1989 40eme RA - Draguignan & Suippes - France
  
  Section commander in instruction battery during one year and observer officer in gunnery battery.
  Management of people and sensitive material (small arms and communication materials).

Formations

• Institut Des Sciences De L'Ingénieur De Toulon Et Du Var ISITV

  La Valette Du Var 2000 - 2002 Science des Materiaux

Réseau

• Anne-Marie ROY

• Christophe CERF

• Olivier LE GUENNEC

• Petro PROFILER

• Remy.loubet@laposte.net LOUBET

• Sami YOUSFI

• Sami MOKRANI